Filter
Top Products
Mounting Requirements
100-88002 Rev B Page 47
Spindle Mounting Options
The Epic 880
TM
spindle assembly can be mounted in one of five locations on
the left side of the printer or one of four locations on the control panel side.
The following figures show typical mounting locations and cable dressing
options.
45˚ Up Spindle Mounting
Figure 11. 45˚ Up Spindle Location
Figure 11 shows the 45˚ Up spindle position with the arm at a 45˚ angle up.
Note the location of the pivot and mounting screws.
Pivot and Locating
Screws
Paper Spindle
Bracket