Filter
Top Products
Epic 880
TM
Color Graphics
Page 190 100-88002 Rev B
Epic 880
TM
Coupon-Cut-Logo Feature
The Epic 880
TM
printer has a feature that will allow a coupon and or logo graphic to be
printed as part of the existing auto cutter command.
To activate this feature, it must first be configured. Configuration consists of
specifying in what order the Coupon-Cut-Logo is processed and optionally, how much
paper is to be feed after the new cut operation.
Once configured, the Coupon and/or logo must be defined and loaded into the printer.
The “Universal Graphics” feature should be used to define and load the graphic. The
Coupon is named “Coupon”, and the Logo is named “Logo”. They may be saved in
any resolution and of any size. They also need not be all graphics.
The existing application cut command will be replaced by the Coupon-Cut-Logo
operation. Configuration options are as follows:
Cut Command Logo:
Cut-Logo Perform Feed to cut, then cut, and then print the Logo.
Coupon-Cut Print the Coupon, Feed to Cut, and Cut.
Logo-Cut Print the Logo, Feed to Cut, and Cut.
Cut-Coupon Perform Feed to cut, then cut, and then print the Coupon.
Coupon-Cut-Logo Print the Coupon, Feed to cut, Cut, ad then print the Logo.
Logo-Cut-Coupon Print the Logo, Feed to cut, Cut, ad then print the Coupon.
Cut-Logo-Coupon Perform the Feed to cut, Print the Logo and then the Coupon.
Cut-Coupon-Logo Perform the Feed to cut, Print the Coupon and then the Logo.
Logo-Coupon-Cut Print the Logo, then the Coupon, feed to cut and Cut.
Coupon-Logo-Cut Print the Coupon, then the Logo, feed to cut and Cut.
Disabled Perform the Normal cut.
Cut Command Logo Feed: 0 to 80 mm.