Filter
Top Products
Control Codes
Page 160 100-88002 Rev B
Remote Power Control
The Epic 880
TM
Printer has a remote power control command that instructs it to enter
OFF mode. When the command is issued, the printer performs print cartridge
maintenance and enters OFF mode. Unlike manually turning the power off, remote
power mode leaves the communications active. All commands except the exit power
down command are ignored.
[ESC] y Remote Power Control
ASCII [ESC] y <n>
Hexadecimal 1BH 79H <n>
Decimal <27> <121> <n>
IPCL &%YX17 or &%YX18
EPOS [ESC] y <n>
Where n 17 Requests the printer to enter remote OFF.
18 Requests the printer to exit remote OFF
Description Inquiry (ENQ) commands are accepted and answered in remote power
down mode. The printer reactivates if a power up command is received or the power
is cycled.
Note 1: If power is lost after the power down command is issued, the printer
will reenter normal operation when the power is restored.
Note 2: This command is not available in all configurations mode.