Filter
Top Products
Mounting Requirements
Page 50 100-88002 Rev B
Straight Down Rear Spindle Mounting
Figure 15. Straight Down Rear Spindle Location
Figure 15 shows the straight down rear spindle position with the arm at a 90˚
angle down. Note the location of the pivot and mounting screws. This location
requires that the paper guide be mounted to the printer to assure that the
cabling does not interfere with the paper path.
Note: The printer is larger with the paper guide installed.
Control Panel Side Spindle Mounting
All five positions can be duplicated on the control panel side of the printer with
the exception of the straight down center location shown in
Figure 14 as the
control panel occupies that location.
Pivot and Locating
Screws
Paper Spindle Bracket
Paper Guide required
for this orientation