Epson 100-88002 Printer User Manual


 
Electrical Connections
100-88002 Rev B Page 61
Communications Interface
USB and RS-232 communications are supplied through interface connections
at the rear of the printer, as illustrated in the figure. The Serial RS-232
interface connector is a locking Molex connector and the USB interface is a
standard USB B connector. Power is supplied through a locking 4-pin Molex
connector as shown.
Figure 21. Communication PCB Location and Connector Info.
Note: Pin-out configurations for these interfaces are documented in Chapter 2,
Epic 880
TM
Specifications and Requirements.
USB
p
ort
Serial communications port
Power connector