Filter
Top Products
Control Codes
Page 126 100-88002 Rev B
The terminating <0> may be replaced with an & or redefined. See [ESC] [EM]T<n>
or &%UT<n> on page 128.
Note: User defined macros must use a .mac extension.
Function Load item from user store
ASCII [ESC] [US] l <Name.. mac > <0>
Hexadecimal 1BH 1FH 6CH
Decimal <27> <31> <108>
IPCL &%UL <Name..> <0>
EPOS [GS] 0<Name..> <0> is from one to 15 characters and must be null
terminated.
Description The [ESC] [US] l <Name..> <0> command loads the referenced item into
the appropriate structure. If the item referenced is a user-defined character set, it is
loaded into the current user-character definition, which does not affect the active state
of user-defined characters. If it is a macro, it is loaded into the macro buffer, but it is
not inserted into the data stream. [ESC] g <0> inserts the macro buffer into the data
stream. If the named item does not exist, the command does nothing.
The terminating <0> may be replaced with an & or redefined. See [ESC] [EM]T<n>
or &%UT>n> on page 128.
Note: User defined macros must use a .mac extension.
Function Run macro data from user store
ASCII [ESC] [US] r <Name.. mac > <0>
Hexadecimal 1BH 1FH 72H
Decimal <27> <31> <114>
IPCL &%UR <Name..> <0>
EPOS [GS] 0<Name..> <0> is from one to 15 characters and must be null
terminated.
Description The [ESC] [US] r <Name..> <0> command loads the referenced macro
into the macro buffer. The macro buffer is then inserted into the data stream. If the
named item does not exist or is not a macro, nothing happens.
The terminating <0> may be replaced with an & or redefined. See [ESC] [EM]T<n>
or &%UT<n> on page 128.
Note: User defined macros must use a .mac extension.
Function Flag item as a start-up macro
ASCII [ESC] [US] s <Name.. mac > <0>
Hexadecimal 1BH 1FH 73H
Decimal <27> <31> <115>
IPCL &%US <Name..> <0>
EPOS [GS] 0<Name..> <0> is from one to 15 characters and must be null
terminated.