Filter
Top Products
100-88002 Rev B Page iii
Federal Communications Commission Radio Frequency
Interference Statement
The
Epic 880
TM
Printer complies with the limits for a Class A computing device in
accordance with the specifications in Part 15 of FCC rules. These regulations are
designed to minimize radio frequency interference during installation; however, there
is no guarantee that radio or television interference will not occur during any particular
installation. Interference can be determined by turning the equipment off and on while
the radio or television is on. If the printer causes interference to radio or television
reception, try to correct the interference by one or more of the following measures:
1. Reorient the radio or television receiving antenna
2. Relocate the printer with respect to the receiver
3. Plug the printer and receiver into different circuits
If necessary, the user should consult their dealer or an experienced radio/television
technician for additional suggestions. The user may find the following booklet
prepared by the Federal Communications Commission helpful:
How to Identify and
Resolve Radio/TV Interference Problems
. This booklet is available from the US
Government Printing Office, Washington, DC 20402. Ask for stock number 004-000-
00345-4.
Canadian Department of Communications Radio
Interference Statement
The
Epic 880
TM
Printer does not exceed Class A limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Regulatory Compliance
FCC Class B
CE Mark
EN 60950-1
UL 60950-1
CAN/CSA-C22.2 NO. 60950-1
EN55022
EN55024
ROHS