Filter
Top Products
Control Codes
100-88002 Rev B Page 167
bit 6 = 1 always
bit 7 = 0 always
<r
2
>: bit 0 = 1 always
bit 1 = Cover is closed.
bit 2 = Buffer is empty.
bit 3 = Printer has been power cycled,
Reading this does not affect the state of the
power-cycled flag. (Use [ENQ] <11> to reset
the power cycled bit.)
bit 4 = Printer is waiting in an error mode.
Use [ENQ]<22> to identify the specific error
and [ENQ]<10> to recover
bit 5 = USB Watch Dog recovery has occurred.
bit 6 = 1 always
bit 7 = 0 always
<r
3
>: bit 0 = 0 always
bit 1 = 1 always
bit 2 = Jam detected
bit 3 = 0 always
bit 4 = 0 always
bit 5 = Printer is blocking print
(Cover is open or out of paper.)
bit 6 = 1 always
bit 7 = 0 always
<r
4
>: bit 0 = 1 Printer supports single station print.
bit 1 = 0.
bit 2 = Printer supports multiple colors
bit 3 = Printer supports cutter
(Partial cut command is supported as full cut)
bit 4 = Printer supports cutter.
bit 5 = 0
bit 6 = 1 always
bit 7 = 0 always
<r
5
>: 0
<r
6
>: 0
<r
7
>: 0