Filter
Top Products
Epic 880
TM
Color Graphics
100-88002 Rev B Page 189
Bitmapped File Graphic Support
It is possible to load a bitmap file into the printer and print it directly by command. The
standard bitmap two color and 16 color bitmap file formats are supported.
To use this feature, load a bitmap file into the printer using the file support commands
or the Windows
®
interface tool. These files can then be printed with the Print Bitmap
File command. It is also possible to print a bitmap file passed from the host as data.
Function Print Bitmap File command. All
ASCII [ESC] [FS] P<scale> <Filename><0>
Hexadecimal 1BH 1CH 50H
Decimal <27> <28> <80>
Scale 0 = one to one, 1 = 2x high, 2 = 2x Wide, 3 = 2x High and 2x Wide
FileName File name from 1 to 30 characters including a three character extension,
null terminated.
Description The [ESC] [FS] P command will print at the current dot column a
previously saved bitmap file image. If the file does not exist, this command will have
no effect.
Note: If the Scale is an uppercase ‘B’ this command will directly process a
bitmap file. See the Print Bitmap Data command below.
Function Print Bitmap Data command. All
ASCII [ESC] [FS] P <Bitmap file data>
Hexadecimal 1BH 1CH 50H
Decimal <27> <28> <80>
Description The [ESC] [FS] P command will print the bitmap file data that follows.
Note that the first character in a bitmap file is an uppercase B. This differentiates this
command from the Print Bitmap File command described above.
Note: This command always prints the bitmap data at a scale of one to one.