Epson EMP-505 / 715 Projector User Manual


 
10 - Safety Precautions
Caution
Never stand on the projector or place any heavy objects on it.
Failure to observe this may result in it dropping over, becoming dam-
aged, or causing injury.
Never place the projector on unstable surfaces, such as wobbly
tables or slanted surfaces.
Failure to observe this may result in it dropping over, becoming dam-
aged, or causing injury.
Do not place or store the projector within the reach of children’s
hands.
Failure to observe this may result in it dropping over, becoming dam-
aged, or causing injury.
Do not place the projector in humid or dusty locations, or in
locations where it would be subject to oil steam or water steam,
such as kitchens or near humidifiers.
Failure to observe this may result in the outbreak of fire or electric
shocks.
Never block the projector’s suction inlets or ventilation outlets.
Failure to observe this may result in the build up of high temper-
atures inside the projector, leading to the outbreak of fire. Do
not place the projector in the following locations.
· In narrow, badly ventilated areas, such as in cupboards or in book-
cases.
· On top of carpets, matresses or blankets.
· Never cover the projectors with table cloth or other material.
Also, if placing by a wall, ensure that at least 20cm of space has
been provided between the projector and the wall.
Never attempt to remove the lamp immediately after use. Wait
for approximately one hour after the power has been cut off to
allow the lamp sufficient time to cool.
Failure to observe this may result in the outbreak of fire.