Filter
Top Products
68 - Menu Operations
· The image menu and information displayed will differ in accordance with the projected input
source, and Menus other than that belonging to the projected input source cannot be adjusted.
· The information menu displays the status of the input source settings being projected.
Adva
nced
Language Sets the language with which messages are to be displayed.
Press the [Enter] button and select the required language
from the language selection menu displayed.
English
Startup Screen Displays the user logo during warm-up after the power has
been switched on.
·The user logo must be registered and set up before it can be
amended.
ON
Color Setting Adjusts the color temperature (*) of the image.
Color temperature: Sets the color temperature.
Press the [Enter] button and make the setting on the color
setup menu displayed.
RGB: Sets the strength of the RGB colors (red, green and
blue.)
·Press the [Enter] button, select the R (red), G (green) and B
(blue) items on the color setup menu displayed, and then
make the necessary setting.
·Observe the status of the screen when adjusting the settings.
Color
temperature
Rear Proj. Set at [ON] to project images onto a half-transparent screen
from the rear. The projected image will be inverted.
OFF
Ceiling The projected image will be inverted up, down, left and right
when this is set at [ON].
OFF
Reset Returns all advanced setting menu adjustment values to the
default values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to the
default settings.
-
About (Displays the current settings) -
Reset
all
Execute Returns all items in the set-up menus to the default values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Execute the [Reset] function from each individual sub menu
to return the image and sound settings to the default values
for each menu.
·The User’s Logo Capture, Lamp ON Time, language and
BNC settings cannot be restored to the default values.
-
To p
Menu
Sub Menu Function Default Value