Filter
Top Products
P in P Function - 59
■
■■
■ P in P Function
It is possible to display a video image as a sub-screen within a computer image or component
video image. It is also possible to output the sound.
1
Press the [P in P] button on the remote control.
An operation guide will be displayed in the top left-hand corner of the screen and the sub-
screen will be displayed at the top right-hand side of the screen.
2
Press the [Enter] button on the remote control to move the position of the sub-screen.
3
Press the [E-Zoom] button to change the size of the sub-screen.
4
Press the [Enter] button to set the sub-screen display.
Point
· The sub-screen will be erased when the [PinP] button is pressed again.
· The computer image or video image (only component video image signals) will be dis-
played in the main screen, and the video image (Video, S-Video) will be displayed in the
sub-screen. The video image displayed in the sub-screen can be amended with the PinP
setting. (see page 67
)
· Adjust the position and size of the sub-screen prior to displaying it.
· The sub-screen can be switched between five different sizes.
· When the position of the sub-screen has been amended, it will be displayed in the previ-
ously determined position the next time the Picture-in-Picture function is executed.