Filter
Top Products
Parts, Names and Operations - 21
Inserting the Remote Control Batteries
The remote control batteries are inserted in accordance with the following procedure:
1
Remove the Battery Cover.
Apply pressure to the clip holding the Battery Cover, and then lift it upwards.
2
Insert the batteries.
Ensure that the batteries are aligned correctly with the “+” and “-“ labels on the remote
control.
3
Replace the cover.
Apply pressure to the battery cover until it clicks firmly into place.
Point
· Specified batteries: Phase-3 alkali dry-cell batteries (LR6) X 2
· The batteries should be replaced approximately once every three months when used for
thirty minutes per day.
Caution
Ensure that unused batteries of the same type are used.