Menu Operations - 65
Setting items
To p
Menu
Sub Menu Function Default Value
Video Position Moves the position of the image display up, down, left and
right. Press the [Enter] button to perform the adjustments on
the display position adjustment screen.
Depends on the
connection
signals
Tracking Adjusts vertical stripes that appear on the Computer image. Depends on the
connection
signals
Sync. Adjusts disturbance, blurring and vertical noise that appears
on the Computer image.
·Disturbance and blurring may occur as a result of adjusting
the brightness and contrast.
·It is possible to regulate the vividness of the image by
adjusting the synchronization after adjusting the tracking.
0
Brightness Adjusts the brightness of the image. Center value (0)
Contrast Adjusts the contrast of the image. Center value (0)
Color Adjusts the strength of the color.
Press the [Enter] key to display the adjustment screen, and
then adjust the strength of the red, green and blue.
0
Color Adjusts the color depth of the image. Center value (0)
Tint Adjusts the tint of the image. Center value (0)
Sharpness Adjusts the sharpness of the image. Center value (0)
Gamma Corrects the color vividness of the image.
Dynamic: Produces an image with clear color differences.
Suitable for displaying plans, etc.
Normal: Projects tint without correction.
Natural: Produces an image with natural tint. Suitable for
video images.
Normal
Input signals Sets the mode for the input image signals connected to the
Computer/Component Video port.
RGB : Set when RGB signals are being input.
YCbCr: Set when component video signals (YCbCr) are
being input.
YPbPr : Set when component video signals (YPbPr) are
being input.
RGB
Auto Setup Automatic setup: Optimizes the computer input image when
set at [ON].
ON
Reset Returns all image menu adjustment values to the default val-
ues.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to the
default settings. (see page 68
)
-