Filter
Top Products
Safety Precautions - 11
●
Always ensure that the power has been switched off, the plug
has been disconnected from the power socket, and all other
cables have been disconnected when moving the projector.
Failure to observe this may result in the outbreak of fire or electric
shocks.
●
Never attempt to remove the lamp immediately after the projec-
tor has been used. Wait for the projector to cool down suffi-
ciently by leaving it for at least sixty minutes after the power
supply has been switched off before attempting this.
Failure to observe this may result in burns or other injuries.
●
Misuse of the batteries may result in damage to the batteries
and subsequent leakages, leading to the outbreak of fire, injury
and product corrosion. Observe the following precautions to
ensure safety.
· Never use combinations of different batteries, or old batteries
together with new batteries.
· Never use batteries that are not specified in the instruction manual.
· If liquid should leak from the battery, wipe up the leakage with a
cloth and then replace the battery accordingly.
· Replace the batteries immediately when the time for replacement
arrives.
· Remove the batteries when the projector is not to be used for a long
period of time.
· Never apply heat to the batteries, or place them in naked flames or
water.
· Ensure that the batteries are inserted in accordance with the cor-
rect polarity (+ and -).
· If any liquid that has leaked from a battery gets onto the hands,
wash it off immediately with water.
Batteries must be disposed of in accordance with the regulations in
effect in each relevant area.
●
Ensure that the electric plug and connectors have been discon-
nected from their sockets when performing maintenance tasks.
Failure to observe this may result in electric shocks.
Caution
Confirmation