Filter
Top Products
30 - Connecting the projector to a computer
Connecting up the mouse (wireless mouse function)
This enables the computer’s mouse pointer to be operated with the remote control in the same
way as a wireless mouse.
Connect the computer's mouse port to the projector's Mouse/Com port or USB mouse port
with the mouse cable.
PS/2 mouse connection
USB mouse connention
Refer to the above table before making your selection.
Point
· Only the USB standard mounted model supports USB Mouse Cable connections. In the
case of Windows, only the Windows 98/2000/Me preinstalled model is supported. Opera-
tions cannot be guaranteed on upgraded Windows 98/2000/Me environments.
Supports OS9 and higher with the Macintosh environment.
There are cases where it is not possible to use a mouse with both the Windows and
Macintosh platforms depending on the version of the OS.
· There are cases where certain settings must be made on the computer in order to use a
mouse. Refer to the computer's instruction manual for further details.
· Switch off the power supply to the projector and computer prior to making the connection.
· The computer will require rebooting if it does not work.
· Consult with your vendor if with to use a serial mouse, or ADB mouse on a Macintosh.
Computer Mouse to use Mouse cable to use
PC/AT
DOS/V
PS/2 mouse PS/2 mouse cable (supplied)
USB mouse USB mouse cable (supplied)
Macintosh
(OS9 or higher)
USB mouse USB mouse cable (supplied)
Mouse/Com
Mouse/Com port
Mouse port
PS/2 Mouse Cable (supplied with the projector)
Mouse/Com
USB port
USB Mouse Cable (supplied with the projector)