Filter
Top Products
Ending - 41
4
Check to ascertain that the cooling down period has ended (the operation indicator will
be illuminated in orange), and then remove the power plug from the socket.
5
Set the R/C ON OFF switch to [OFF] when not using the remote control.
Point
The batteries are being consumed when the [R/C ON OFF] switch on the remote control
unit is set at [ON]. Ensure that the [R/C ON OFF] switch on the remote control unit is set to
[OFF] when not in use.
6
Restore the Front Foot if it has been extended.
Steady the projector by hand, and then lift the Foot Adjust Lever with a finger and gently
lower it into the main Unit.
Caution
Do not remove the Power Plug from the socket when the Operation Indicator is blinking in
orange. Failure to observe this may result in damage to the equipment and will speed up the
period for replacing the lamp.
Illuminated in orange
Operation Indicator
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2
4
Enter
Foot Adjust Lever