Filter
Top Products
Connecting up computer with USB cables - 95
3
Select the added drive.
All subsequent operations are the same as Windows file operations.
Point
· You cannot connect to Macintosh. Do not transfer or connent to Macintosh, as it might
cause a data crush.
· Projector memory card operations from a connected computer are only possible when the
projector display is displayed as a file list.
· Operations are not possible when the projector's memory card is being accessed.
Pay attention to the following when a USB connection has been established.
· Do no remove the memory card or unplug the USB cable when the access lamp is blink-
ing. Failure to observe this may result in damage to the memory card or malfunctions on
the computer.
· Confirm that the access lamp has been extinguished before selecting [Yes] (or [No] to
return the system to the original status) when the Abort USB Access message is dis-
played. Failure to observe this may result in damage to the memory card or malfunctions
on the computer.
· Do not perform access from the computer after the Abort USB Access message has been
displayed. Access will be possible after the screen has returned to the file selection
screen.
· Select [Disconnect Removable Devices] when removing memory cards on the Windows
2000/Me platforms.
· The image capture function cannot be used during USG connections.