Filter
Top Products
14
EMP-735 User’s Guide
Projecting Images from the Computer
The shape and specifications of the computer's monitor port will determine
what type of cable should be used. Check the following to see which type of
port your computer has.
Use the accessory computer cable to connect the Computer/Component Video
port at the rear of the projector to the monitor port of the computer.
Tip :
• After starting projection, set to "Computer" by selecting "Video" - "Input Signal" on the
configuration menu. ( p.45)
• If more than one external component is connected to the projector, use the [Source]
button on the projector's control panel or the [Comp/EasyMP] button on the remote
control to select the Computer port as the input source. ( p.27)
• Do not bind the power cable and the computer cable together, otherwise image
interference or errors in operation may result.
If the Monitor Port is a Mini D-Sub 15-pin Port
Computer cable
(accessory)
To monitor port
To Computer/Component
Video port (blue)
Connecting to a Computer