Filter
Top Products
31
EMP-735 User’s Guide
Adjusting the Image Angle and Automatic Keystone
Correction Function
The projector should be set up so that it is as perpendicular to the screen as possible.
If it is not possible to set up the projector perpendicular to the screen, it can be
set up at a slight vertical angle. You can extend or retract the front adjustable
feet to adjust the projection angle with a maximum tilt of 11º.
When the projector is tilted at an angle and images are projected, it will cause
keystone distortion to appear in images on the screen. For this reason, the
projector is equipped with the "automatic keystone correction function" that can
automatically correct this keystone distortion on the screen as long as the
vertical angle of tilt is within approximately 15º.* Automatic keystone
correction is performed approximately one second after the projector has been
set up with the projector's power turned on.
S
een
f
rom the side
S
een
f
rom above
9
1
15º
15º
Approx. 15º above Approx. 15º below
Adjusting the Screen Image
Centre of
lens