Filter
Top Products
75
EMP-735 User’s Guide
f If making a wireless LAN connection, are the computer and projector
set to the same ESSID (Network name)?
For Windows
Please set the projector to the same ESSID (Network name) as the computer.
Please set the computer to the same ESSID (Network name) as the projector. If there are no
settings for ESSID in the communication settings utility of your wireless LAN, "ESSID ad
hoc" cannot be used. In this case, please use "Channel ad hoc".
For Macintosh
Click on the communication status icon in the top right corner of the computer screen.
Select the projector’s ESSID name from the pull-down menu which is displayed.
"Connecting Using Easy Connect Mode" in the EasyMP Setup Guide
f Is the Network Screen Network advanced settings screen displayed
on the projector?
Network connection is disabled when a Network Screen advanced settings screen is
displayed. Please return to the Network Screen connection stand-by screen.
"Connecting Using Easy Connect Mode" and "Connecting in Access Point Mode or
Wired LAN Connection Mode" in the EasyMP Setup Guide
f Is the computer ready for LAN card or in-built LAN functionality to be
used?
Please check whether the LAN device is functioning in the Device Manager.
f If making a wireless LAN connection, is the wireless LAN setting on
the computer set to ad hoc mode?
Select ad hoc mode using the communication settings utility (client manager etc.) of the
wireless LAN device installed in your computer. Some wireless LAN device
manufacturers, may also refer to "ad hoc" as "Wireless LAN Personal Computer
Communication (Wi-Fi)", "Wi-Fi ad hoc", "802.11 ad hoc", "802.11 Mode Connection", or
"Peer to Peer".
f Has the LAN card you wish to use been selected in the EMP NS
Connection Switch network screen? (Windows only)
If the computer you are using has multiple LAN environments, only those which can be
selected from within EMP NS Connection can be used. Please select this LAN from the
"Extension" - "Switch LAN" settings in EMP NS Connection. "Connecting Using
Easy Connect Mode" and "Connecting in Access Point Mode or Wired LAN Connection
Mode" in the EasyMP Setup Guide
f If making a wireless LAN connection, are there any settings within the
power saving features of your computer which disable the wireless
LAN? (Windows only)
Please enable the wireless LAN.
Network Problems