Filter
Top Products
25
EMP-735 User’s Guide
Turning On the Projector
Turn on the power to start projecting images.
Caution :
Be sure to read the separate Safety Instructions/World-Wide Warranty Terms before
projecting images.
Connecting the Power Cable
Procedure
1
Check that the power is turned off for the projector and all
components connected to the projector.
2
Connect the computer or other video source to the projector.
( p.14, 20)
3
Remove the lens cover.
Place your finger under the top of the lens cover and pull to remove the
cover.
4
Connect the accessory power cable
to the projector.
Check that the power cable connector is
facing the same way as the power inlet on
the projector, and then insert the power
cable connector securely into the
projector.
5
Connect the other end of the power
cable to an earthed electrical outlet.
Wait until the Power indicator lights
orange.
Tip :
The projector's control panel and remote control
buttons cannot be operated whilst the Power
indicator is flashing orange.
Lit orange