Filter
Top Products
28
EMP-735 User’s Guide
Turning Off the Projector
Follow the procedure below to turn off the power of the projector.
Procedure
1
Turn off the power for the signal sources that are connected to
the projector.
Check that the power for all connected components has been turned off.
2
Press the [Power] button on either
the projector's control panel or the
remote control.
The following confirmation message will
appear.
If you do not want to turn off the power, press any button except the
[Power], [Page down], or [Page up] buttons.
If you do not press any button, the message will disappear automatically
after seven seconds. (The power will not turn off at this time.)
3
Press the [Power] button once
more.
The lamp will switch off. The Power
indicator will flash orange and cool-
down will start.
The cool-down period lasts for about 45
seconds. (This varies depending on factors
such as the ambient air temperature.)
When cool-down is complete, the Power
indicator lights orange.
Tip :
The projector's control panel and remote control buttons cannot be operated whilst
the Power indicator is flashing orange. Wait until it stops flashing.
Color Mode
Menu
A/V Mute
E-Zoom
Freeze
S-Video/Video
Page upPage down
Power
Comp/Easy MP
Projector
Remote control
Power OFF?
Yes : Press button
No : Press any other button
Stops flashing and lights orange