Filter
Top Products
76
EMP-735 User’s Guide
f Is the wireless LAN you are using Wi-Fi compliant?
Only Wi-Fi 802.11b compliant equipment can be used. You cannot use equipment
conforming to any other Wi-Fi standards (802.11, 802.11a, 802.11g, etc.).
Web site "http://www.epson.co.uk"
f Is WEP encryption set to on? (Windows only)
You cannot connect in ad hoc mode unless WEP is set to OFF. Please set the WEP
encryption setting to OFF. "Connecting in Access Point Mode or Wired LAN
Connection Mode" in the EasyMP Setup Guide
f If in Access point mode, are the computer and projector set to the
same ESSID (Network name)?
For Windows
Connection cannot be made unless the same ESSID (Network name) is selected. Please set
both the projector and computer to the same ESSID (Network name).
For Macintosh
Click on the communication status icon in the top right corner of the computer screen.
Select the projector’s ESSID name from the pull-down menu which is displayed.
"Connecting in Access Point Mode or Wired LAN Connection Mode" in the EasyMP
Setup Guide
f Are the computer and projector set to the same WEP key?
(Windows only)
Connection cannot be made unless the same WEP key has been set. Set the same WEP key
on the projector and computer. "Connecting in Access Point Mode or Wired LAN
Connection Mode" in the EasyMP Setup Guide
f Are the connection refusal functions of the access point, such as the
MAC address and port restrictions, set correctly?
Please set the projector connection permissions on the access point.
f Are the IP address of the computer and the projector, the subnet
mask, and the gateway address set up correctly?
If not using DHCP, please ensure that the settings match on both the computer and the
projector. "Connecting in Access Point Mode or Wired LAN Connection Mode" in the
EasyMP Setup Guide
f Are the subnets of the computer and the projector different?
Please select "Use IP connect mode" in EMP NS Connection and connect using IP connect
mode. "What if the Projector You Want Does Not Appear?" in the EasyMP Setup
Guide
Connection cannot be established in Access point mode or wired
LAN connection mode
Network Problems