Filter
Top Products
55
EMP-735 User’s Guide
• The "About" menu shows the setting details for the current image source.
• The "Lamp" item appears as 0H for 0–10 hours, and after that, it appears in
units of 1 hour.
Computer/RGB video/ Video (S-Video, Composite video)
Component video/EasyMP
(Analogue-RGB, YCbCr, YPbPr)
"About" Menu
Sub-menu Function Default
Lamp Displays the cumulative lamp operating time.
• When the lamp warning period is reached, the display
characters appear in red.
0H
Reset Lamp
Timer
Initialises the lamp operating time. When this command
is selected, the cumulative lamp operating time is reset to
the initial default value.
Not
applicable
Video
Source
Displays the input source which is currently being
projected.
Input Signal Displays the input signal settings.
(Does not appear when the input source is composite
video or S-Video)
Video Signal Shows the video signal format.
(Does not appear when the input source is computer,
component video, RGB video, or EasyMP.)
Not
applicable
Frequency Displays the horizontal and vertical scanning
frequencies.
(Does not appear when the input source is composite
video or S-Video.)
Not
applicable
SYNC
Polarity
Displays the sync polarity.
(Does not appear when the input source is composite
video or S-Video.)
Not
applicable
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
Frequency
Video Source
V ---.--Hz
Reset Lamp Timer
H ---.--kHz
Lamp 0H
SYNC Mode
SYNC Polarity
------
V ------
H ------
Resolution
Refresh Rate 0.0 Hz
0x 0
Computer
Input Signal
:
:
:
:
:
:
:
: RGB
Execute
[ ]: Enter[ ]: Select [Menu]: Exit
Video
Auto( )
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
Video Source
Reset Lamp Timer
Lamp
0H
Video Signal
:
:
:
Execute
[ ]: Enter[ ]: Select [Menu]: Exit
Using the Configuration Menu Functions