Filter
Top Products
79
EMP-735 User’s Guide
f Failed to initialize EMP NS Connection.
Uninstall and then reinstall EMP NS Connection.
"Uninstalling EasyMP Software" and "Installing EasyMP Software" in the EasyMP Setup
Guide
f Communication error occurred. Do you want to retry connection?
A communication error has occurred between the computer and the projector and the
connection has been terminated.
Click "Yes" to reconnect. If connection is still not possible, check the LAN on the
computer and the Network Screen Network advanced settings on the projector. For details
concerning the Network advanced settings,
"Connecting Using Easy Connect Mode" and "Connecting in Access Point Mode or
Wired LAN Connection Mode" in the EasyMP Setup Guide
Click "No" to remain disconnected and close this message screen.
f One of the projectors cannot be connected with the keyword entered.
The wrong keyword was entered when trying to connect to a projector with a projector
keyword. Check the projector Connection stand-by screen for the correct projector
keyword.
"Connecting Using Easy Connect Mode" and "Connecting in Access Point Mode or
Wireless LAN Connection Mode" in the EasyMP Setup Guide
f Failed to obtain network adaptor information. Check network settings
and restart.
Check the following:
· Is a network adapter installed in the computer ?
· Is the driver for the network adapter installed in the computer ?
After checking, restart the computer and try to connect.
If connection is still not possible, check the LAN on the computer and the Network Screen
Network advanced settings on the projector.
For details concerning the Network advanced settings,
"Connecting Using Easy Connect Mode" and "Connecting in Access Point Mode or
Wireless LAN Connection Mode" in the EasyMP Setup Guide
f Some projectors do not support SXGA. Reduce resolution and retry.
Change the screen resolution of the computer to SXGA (1280 × 1024) or lower.
f There is a projector not responding.
One or more projectors failed to connect when an attempt was made to connect
simultaneously to multiple projectors. The successfully connected projectors can be used.
To connect to the projectors that failed to connect, terminate the connection and try again.
If connection is still not possible, check the LAN on the computer, and the Network Screen
Network advanced settings on the projector.
For details concerning the Network advanced settings,
"Connecting Using Easy Connect Mode" and "Connecting in Access Point Mode or Wired
LAN Connection Mode" in the EasyMP Setup Guide
Network Problems