Filter
Top Products
21
EMP-735 User’s Guide
Projecting S-Video Images
Use a S-Video cable (commercially-available) to connect the video source to
the S-Video port at the rear of the projector.
Tip :
If more than one external component is connected to the projector, use the [Source]
button on the projector's control panel or the [S-Video/Video] button on the remote
control to select the S-Video port as the input source. ( p.27)
Projecting Component Video Images
Use the optional component video cable to connect the video source to the
Computer/Component Video port at the rear of the projector. See "Appendices:
Optional Accessories" ( p.94)
Tip :
• Change the "Input Signal" setting in the "Video" menu to "Component Video(YCbCr )"
or "Component Video(YPbPr
)" after starting projection. ( p.47)
• If more than one external component is connected to the projector, use the [Source]
button on the projector's control panel or the [Comp/EasyMP] button on the remote
control to set the input source to "Component Video(YCbCr) " or "Component
Video(YPbPr )", depending on the type of signal being input. ( p.27)
To S-Video port
To S-Video output port
S-Video cable
(commercially-available)
Component video cable
(optional)
To component video
output port
To Computer/Component
Video port (blue)
Connecting to a Video Source