Filter
Top Products
26
EMP-735 User’s Guide
Turning On the Power and Projecting Images
Procedure
1
Check that the Power indicator has
stopped flashing and is lit orange.
2
Turn on the power for all equipment connected to the projector.
For a video source, press the [Play] button at the video source to start
playback if necessary.
3
Press the [Power] button on either
the projector's control panel or the
remote control to turn on the power
for the projector.
The Power indicator flashes green. After a
short period it stops flashing and lights
steadily, and projection starts.
Wait until the Power indicator lights green
(it normally takes about 40 seconds to
change).
Tip :
• The [Power] button on both the projector's control panel and the remote control cannot
be operated whilst the Power indicator is flashing green.
• Depending on the settings, the message "No-Signal." may appear. See "Setting" - "No-
Signal Msg." ( p.50)
Lit orangeLit orange
Color Mode
Menu
A/V Mute
E-Zoom
Freeze
S-Video/Video
Comp/Easy MP
Page upPage down
Power
ESCAuto
Enter
Remote control
Changes from flashing to lit green
Turning On the Projector