Filter
Top Products
96
EMP-735 User’s Guide
USB Connection Setup
In order to control the projector using ESC/VP21 commands, the projector
must be connected to a computer by means of a USB cable. The following
preparation needs to be carried out before communication via a USB
connection can be carried out.
Procedure
1
Download the EMP Link21L utility software from the EPSON
Web site to the computer being used.
For details on acquiring the software, please visit the Web site
http://www.epson.co.uk/support/download/projector.htm.
2
The USB driver (USB-Com Driver) will be downloaded together
with the utility software, so install this USB driver into the
computer that is to be used.
Refer to the EMP Link21L User's Guide that is downloaded together with
the utility software for instructions on installing the USB driver.
3
Change the "Link 21L" setting in the "Advanced" menu to
"ON".
4
Turn off the power for the projector.
5
After cool-down is complete, remove the power cable plug
connected to the projector, and then re-insert it.
6
Turn on the power for the projector.
Once the projector's power has turned back on, communication via a USB
Connection will then be possible.
List of ESC/VP21 Commands