Filter
Top Products
65
EMP-735 User’s Guide
When the Indicators Provide No Help
If any of the following problems occur and the indicators do not offer a
solution, refer to the pages given for each problem.
No images appear (Nothing at all appears)
• No images appear
• Images are out of focus,
distorted or unclear
• Only part of the image is
displayed (Large/small)
• The image colours are
not right
• Images appear dark
( p.65, 66)
(p.67)
(p.69)
(p.70)
(p.71)
• Images appear greenish/
Images appear red-
purplish
• No sound can be heard
• The remote control does
not work
• The power does not turn
off
(p.71)
(p.71)
(p.72)
(p.72)
• Was the power turned off and then straight back on
again?
After the power is turned off (during cool-down
), the
[Power] buttons on the projector's control panel and the
remote control will not work. Wait until cool-down has
finished. You can then use the [Power] buttons. ( p.28)
• Is sleep mode active?
When sleep mode has been set to "ON", the lamp turns off
automatically if no operations are carried out for 30
minutes whilst no image signal is being input. The Power
indicator lights orange at this time.
"Setting" - "Sleep Mode" ( p.51)
• Have you pressed the [Power] button?
( p.26)
• Has the image brightness been adjusted correctly?
"Video" - "Brightness" ( p.45, 46)
• Is A/V Mute mode active?
( p.39)
• Is the projected image completely black?
Some input images, such as screen savers, may be
completely black.
• Is an image signal being input?
If "No-Signal Msg. " in the "Setting" menu has been set to
"OFF", no messages will be displayed. Set it to "Black" or
"Blue" for messages to be displayed. If a message is
displayed, refer to the item indicated.
"Setting" - "No-Signal Msg. " ( p.50)
• Try resetting all of the current settings.
"Reset All" - "Execute" ( p.57)
No images appear