Filter
Top Products
54
EMP-735 User’s Guide
Link21L Sets whether the "EMP Link21L
" utility software is
being used or not.
If settings have been changed, turn off the power and
after cool-down
is complete, unplug power cable then
plug it in again. The settings will be enabled when the
power is turned on again.
See "Utility Software" in the Safety Instructions/World–
Wide Warranty Terms.
OFF
Standby
Mode
When this is set to "Network ON", monitoring and
control of the projector from a computer connected to the
network is possible even if the projector is in standby
mode. If the setting has been changed, turn off the
projector's power once, and then turn it on again after the
cool-down
operation is complete. After the power is
turned on again, the new setting will take effect.
Network
OFF
Language Sets the language used for displays on the EasyMP
screen and for messages.
• Press the [Enter] button and select the language from
the selection menu that appears.
English
(Varies
depending
on country
of
purchase)
Reset Resets all adjustment values for the "Advanced" menu
functions except for the "Language" setting to their
default settings.
• Press the [Enter] button to display the confirmation
screen, and select "Yes".
• Select "Reset All" to return all menu settings including
settings for the "Video" and "Audio" menus to their
default settings. ( p.57)
Not
applicable
Sub-menu Function Default
Using the Configuration Menu Functions