Filter
Top Products
80
EMP-735 User’s Guide
f Enter the keyword displayed on the projector.
Check the projector keyword displayed on the connection stand-by screen of the projector
and enter that projector keyword.
f Cannot find a projector of the specified IP address.
Ensure that the "Access point mode" or "Wired LAN connection mode" setting is being
used in the Network Screen Network advanced settings of the desired projector. Change to
Access point mode or Wired LAN connection mode, if set to Easy connect mode.
Next, check the "IP address" in the Access point mode advanced settings screen or Wired
LAN connection mode advanced settings screen and specify this "IP address" when
connecting in IP connection mode. "What if the projector you want does not appear?"
in the EasyMP Setup Guide
If connection is still not possible, check the LAN on the computer and the Network Screen
Network advanced settings on the projector.
For details concerning the Network advanced settings,
"Connecting in Access Point Mode or Wired LAN Connection Mode" in the EasyMP
Setup Guide
f Image transfer slows if PC resolution is higher than XGA (1024 × 768
pxl.) Do you want to continue?
The display of the computer being connected to the projector is set to resolution higher
than XGA (1024 × 768).
Clicking "Yes" connects the projector. However, the display speed of the projection screen
will be slow.
Clicking "No" aborts the projector connection. To avoid slow display speeds on the
projection screen, change the computer display settings to: XGA (1024 × 768) or lower.
f Image transfer slows if screen color is more than 24 bits. NS
Connection converts it to 16 bits. Do you want to continue?
(Windows)
Image transfer performance will be affected if PC resolution is higher
than XGA (1024 × 768pxl.) or images use more than 32 bits. Doyou
want to continue connection? (Macintosh)
If you click "Yes" or "OK", the connection is made, but performance will decrease.
Network Problems