Filter
Top Products
35
EMP-735 User’s Guide
If vertical stripes appear in the projected
images, and this cannot be fixed using
automatic setup, you will need to adjust the
tracking
manually using the following
procedure.
Procedure
1
Press the [Menu] button on the
remote control, and then select
"Tracking" from the "Video"
menu.
For details on this operation, refer to
"Using the Configuration Menus".
(p.58)
2
Press the [ ] and [ ]buttons
to set the tracking value so
that the vertical stripes in the
projected images disappear.
The tracking value increases or
decreases each time a button is
pressed.
3
After making the adjustment, press the [Menu] button to exit
the configuration menu.
Tip :
The image will flash when continuous tracking adjustment is carried out, but this is
normal.
Adjusting the Tracking
Color Mode
Video
Audio
Setting
User's Logo
Advanced
About
Position
Adjust
Tracking
0
Sync . 0
Brightness 0
Contrast
Sharpness 0
Reset All
+
-
+
-
0
+
-
:
:
:
:
:
[Normal ]
[ESC]: Return [ ]: Select [ ]: Adjust [Menu]: Exit
Select
:
:
Input Signal
Auto Setup
Reset
Execute
ON OFF
:
Select
[Computer
]
:
+
-
+
-
+
-
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
Color Mode
Position
Tracking
Sync .
Brightness
Contrast
Sharpness
:
:
:
:
:
Select [Normal ]
0
0
0
0
1000
Adjust
[ESC]: Return [ ]: Select [ ]: Adjust [Menu]: Exit
Select
Input Signal
Auto Setup
Reset
:
:
Execute
ON OFF
[Computer
]
Adjusting the Image Quality