Filter
Top Products
Using Font Cards
l Keep font cards in their slip cases and blue anti-static bags when
you are not using them.
l Do not store cards in direct sunlight or near a source of heat.
Font cards can withstand temperatures from -20” F to 150° F
(-30” C to 65° C) and can tolerate up to 90% humidity.
Inserting a Font Card
You can insert a font card into either of the two slots on the left side
of the printer toward the front. The top slot is slot A and the bottom
slot is slot B. You can insert font cards or identity cards into slot A
and only font cards into slot B.
WARNING: Be careful when you insert or remove a font
card. You can damage the card by trying to insert it the
wrong way or by using too much force.
You can insert a font card any time when the printer is off. To insert
a font card when the printer is on, follow these steps:
1.
Make sure the printer is off line. Also make sure the printer
cover is closed. When you close the printer cover, the printer
automatically exits SelecType mode.
CAUTION:
Do not insert a font card if the display reads FF
or dp. The FF message indicates the printer’s memory
contains data and the dP message indicates the printer’s
memory is processing data to compose pages. If you see
one of these messages, either press ON LINE and then allow
the printer to finish printing the document or use your
application program to cancel the print job and then press
the printer’s RESET button. Then return to step 1.
Options 4-3