Filter
Top Products
SelecType Menus and Options
LQ/FX Menu 6: Automatic Margins
If your printer is set for LQ or FX emulation, this menu is valid only
when you are printing on continuous paper using the optional push
tractor unit. When this menu is on, the printer leaves a margin
between the last printed line on one page and the first printable line
on the next page. Most software applications take care of your top
and bottom margins and control when the printer skips to a new
page, so you should keep this menu at the factory default setting.
Set automatic margins on only if your application program does not
control the margins. For more details, see the manual included with
the optional pull tractor. The factory setting is 60: off.
Option
Setting
0
Off
1
On
Menu 7: Lines Per Page (LQ/FX)
When you are using LQ or FX mode, you can set the number of lines
per page using this menu. The number of lines per page is
calculated based on a line spacing of l/6 inch, regardless of the
current line space setting. The maximum number changes according
to the current paper size and the orientation. The factory setting is
62 lines.
If you want to change the lines per page setting, follow the steps
under Menu 7 in the section on HP emulation mode menus.
Using the Printer
2-27