Filter
Top Products
Paper Feeding Problems
Note: If you are using the optional push tractor and cannot find a
suitable correction in this section, see the manual included with
the push tractor.
Problem
Solution
The printer does not
feed the paper.
The display reads
PE,
The printer feeds the
paper but does not
print.
The display reads PS ,
There is no paper in the paper tray or you
did not load a sheet using the manual
feeding feature. Press MANUAL FEED. Now
load a stack of paper in the paper tray or
insert a sheet manually from the paper
tray cover. See Chapter 3 for paper
loading instructions.
The actual paper size does not match the
SelecType paper size setting or the
software commands. Press MANUAL FEED
to eject any paper in the paper path and
load the correct size paper. Or, press
ON LINE to print on the currently loaded
paper. In this case, some data may not be
printed if the actual paper size is smaller
than that set by SelecType or the software
command. See Chapter 2 to change
SelecType settings.
Troubleshooting
6-11