Filter
Top Products
Using a Memory Board
11. Slide the extension tray back into place. Then move the left
paper guide left until it clicks into place. Replace the paper
support and press on the back part of it to secure it to the bar.
12. Load paper, move the right paper guide so that it rests lightly
against the paper stack, and replace the paper tray cover.
13. Make sure the printer is turned off. (When the O` on the power
switch is visible, the printer is off.) Then plug the power cord
back into the electrical outlet.
Checking the Memory Board
After you install the memory board, print a status sheet to see
whether the board is properly installed. To print a status sheet, use
the SelecType status sheet/self test menu as described in Chapter 2.
If the board is installed properly, the printer configuration on the
status sheet indicates the printer has 2.5MB of memory.
Options
4-15