Filter
Top Products
The Control Panel
MANUAL FEED
Ordinarily, this light is off and paper feeds
automatically from the paper tray. When
you want to feed paper manually, set the
printer off line and press this button. When
you want to print on contimuous paper,
press MANUAL FEED to release the paper in
the paper tray.
RESET
When the printer is off line and no data is
in memory, press RESET once to cancel any
settings made by printer commands and to
cancel draft printing and manual feed
modes, if they are selected. Hold this button
down for 5 or more seconds to reset all
printer settings to factory settings. (The
printer cannot be reset with this button if it
was set off line by a fatal error.)
Note: If you want to stop the printer while it is printing, cancel
the print job using your application program and then press
RESET to reset the printer.
When the printer cover is open, the five buttons described above
have a different shape and two sets of labels. Their functions,
however, are the same as long as you are not in SelecType mode
(whenever the SelecType light is off). You can also see a sixth button,
Select Type, which is only visible when the printer cover is open.
SelecType functions for each button are explained in the next
section.
If you use the parallel interface and print on letter size paper, you
may not need to use SelecType except to run the status sheet or self
test.
Using the Printer
2-5