Filter
Top Products
SelecType Menus and Options
Menu 6: Automatic Margins
When this menu is on, the printer leaves a margin between the last
printable line on one page and the first printable line on the next
page. Most software applications take care of your top and bottom
margins for you and control when the printer skips to a new page,
so you may never need to change this menu. The factory default
setting is 61: on. If you set the menu to off, no top or bottom margin
is established.
Option Setting
0
Off
1
On
Note: Whenever this menu is changed, the top margin and text
length are reset to their default values.
Menu 7: Lines Per Page
This menu sets a fixed number of lines to be printed on a page. It
also changes the line spacing. This setting is affected by the current
paper size, orientation, and font settings. The factory setting for the
number of lines is 60.
Changing the setting for this menu is completely different from
other SelecType menus. The following steps explain how to change
the setting for this menu.
1.
Press ON LINE to set the printer off line.
2.
Press SelecType to enter SelecType mode.
2-16
Using the Printer