Filter
Top Products
Command Summary for LQ/FX Emulation
This summary contains all the commands used by the printer in LQ
or FX emulation mode. Command parameters are indicated by
lowercase italicized letters, usually n. The examples below show
how the parameters are indicated.
ESC @ is a command with no parameters.
ESC U l/0 is a command that uses 1 to turn the feature on and 0
to turn it off.
ESC $ n1 n2 is a command with two parameters.
ESC D nn is a command with a variable number of parameters.
EPI-4000 and LQ/FX Command Differences
Some LQ and FX printer codes are not available with the EPI-4000,
either because the functions are not required (such as draft
printing), or are not possible because of the different technologies
used in the printers. The following commands are either not
available or are ignored in LQ and FX emulation modes:
ESC <
ESC 8
ESC 9
ESC U
ESC s
ESC r
ESC i
BELL
unidirectional mode (one line)
disable paper end detector
enable paper end detector
select print direction
set/cancel half-speed printing
select color printing
incremental view
buzzer control
B-20
Modes and Commands