Filter
Top Products
Test Print
Problem Solution
The self test or
status sheet does not
print.
The printer does not
If the display reads PE, make sure you
feed
paper at
all.
have loaded paper in the paper tray,
If the display reads PS, you may not
have set the correct paper size. Make
sure that the size of paper you load in
the paper tray or insert manually from
the paper tray cover matches the paper
size you have set with SelecType. See
Chapter 2 to change SelecType settings.
After choosing self test or status sheet
from the SelecType test print menu, you
may not have pressed SET long enough
to start the test print. Push SET again;
this time, hold the button down until the
display reads SP.
If the printer still does not produce the
self test or status sheet, contact your
Epson dealer for assistance.
6-18
Troubleshooting