Filter
Top Products
SelecType Menus and Options
Menu 8: Status Sheet/Self Test
Use this menu to print a status sheet or a self test. The self test is a
one-page sample showing output from your printer. It lets you
check printer operation without sending a print job from your
computer.
The status sheet is a report containing information on your printer
configuration and SelecType settings and print samples of the
available fonts. The status sheet makes an excellent SelecType menu
and is a handy way to check all of your settings. The factory setting
is PO: Status sheet.
Option
Setting
0
Status sheet
1
Self test
Note: Only letter or
A4 size paper should be used to print status
sheets or self tests.
Other sizes of paper cause a paper size error.
Your printout
may also be incomplete if you use paper smaller
than letter size.
Choose the status sheet or self test option and press SET (to save the
setting). Close the printer cover. When the status sheet or self test is
finished printing, the printer goes off line automatically. A sample
of the self test is shown below.
./0123456789:;
<=>?@ABCDEFGHIJKLMNOPQRSTUVW
/0123456789:;
<=>?@ABCDEFGHIJKLMNOPQRSTUVWX
0123456789:;
<=>?@ABCDEFGHIJKLMNOPQRSTUVWXY
123456789:;
<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ
23456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[
3456789:; <=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\
456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]
2-18
Using the Printer