Filter
Top Products
Paper Handling
Problem
Solution
The printer feeds
the paper crookedly
or causes the paper
to jam (continued).
The printer feeds two
or more sheets at the
same time.
The printer feeds the
paper but then causes
it to jam at the output
area.
The printer prints a
page and then
stops.
The display reads PS.
You may have loaded too many sheets
of paper in the paper tray. The tray
holds a maximum of 150 sheets of
average paper. Remove any excess
sheets.
The stack of paper may not have been
fanned sufficiently. Before you load a
stack of paper, be sure to fan it first and
align the edges of the stack.
There may be too much paper in the
output tray. Never let more than 30
sheets of paper accumulate in this tray.
You may be using a non-standard paper
size (a size that cannot be selected with
the SelecType paper size menu>. You
may be able to feed the paper by
pressing ON LINE; however, the printout
may be incomplete if the actual paper
size is smaller than the SelecType paper
size setting.
6-32
Troubleshooting