Filter
Top Products
Paper Handling
Problem Solution
The printer prints a
page and then stops
(continued).
The display reads PS
(continued).
You t y to insert a
single sheet manually,
but the sheet does not
go in properly.
If the SelecType auto continue menu is
on, your printer starts printing on the
current paper about 1 second after the
PS error message appears. When this
happens, the printer’s memory may lose
some data if the paper size in the tray is
smaller than the paper size set in
SelecType.
The paper is old or creased. Discard the
old paper and load new, clean paper. If
your paper is creased, you may not be
using the proper size paper. Use only
paper sizes that are within the range
specified in Chapter 7.
Paper guides on the paper tray cover are
too loose. Adjust the guides so that the
paper slides in and out freely.
6-34
Troubleshooting