Filter
Top Products
SelecType Menus and Options
Menu 9: Printer Mode
The printer mode menu has three options: HP LaserJet series II
emulation, Epson LQ-2500 emulation, and Epson FX-850/1050
emulation. The factory setting is 90: HP emulation mode. For best
results, leave this setting at HP emulation mode and choose the HP
LaserJet series II printer in your application program setup.
Option
Setting
0
HP LaserJet series II emulation
1
Epson LQ-2500 emulation
2
Epson FX-85011050 emulation
I 3
(Reserved)
Note: Option 3 is reserved for future IC emulation cards. When
these cards become available from Epson you can use the mode
by inserting the card in slot A and setting this menu to 93.
Menu A: Auto Line Feed
In most cases, this menu should remain at its factory setting A0: off
If lines print on top of one another, set auto line feed to A 1: on
Option
0
1
Setting
Off
On
Using the Printer 2-19