Filter
Top Products
SelecType Menus and Options
Menu b: Interface
This menu gives you two options for the interface setting: parallel or
serial. The factory setting is b0: parallel interface. If you choose to
install an optional interface board, make sure this menu is set to
parallel whether the board is for a serial or parallel interface. ‘This is
because all optional interface boards use the printer’s internal
parallel connections. The serial option is for use with the printer’s
internal RS-232C serial interface only.
Option
Setting
0
Parallel interface
1
Serial interface (RS-232C)
Menu C: Baud Rate
This menu appears only after you set the RS-232C serial interface
option. You can use this menu to select a baud rate for serial
communications. See your computer manual and software
documentation for the proper setting. The factory setting with the
RS-232C interface is C0: 19,200 baud.
Option
Setting
0
19200
1
9600
2
4800
3
2400
4
1200
5
600
6
300
2-20
Using the Printer