Filter
Top Products
Status and Error Messages
CAUTION: Do not open the printer cover while your print.
If you do, the printer stop printing, goes off line, and
some part of the page may be faint or may not be printed
at all.
dP Processing data
The printer is processing data. If you set the printer off line while it
is printing, it displays this message. To resume printing, press
ON or FORM FEED. See Chapter 4.
E0 through E9 ,
EA through EF Service required
If one of these error messages appears, write down the message the
printer displays and immediately turn off the printer. Turn on the
printer after a few seconds to see if the error message still appears. If
it does, unplug the power cord from the electrical outlet and contact
your Epson dealer. In most cases, these error messages indicate that
the printer requires service.
E9
and
EA
through
EF
are fatal error messages.
F FX emulation mode
When you select Epson FX emulation mode, the printer displays this
status message for a short time.
FF Form feed
The printer’s memory contains page data. Press FORM FEED to print
the data in the printer’s memory.
H
HP emulation mode
When you select HP LaserJet emulation mode, the printer displays
this status message for a short time.
6-4
Troubleshooting