Filter
Top Products
Status and Error Messages
P S
Paper size error
The SelecType paper size setting does not match the actual paper
loaded in the printer. Press MANUAL FEED to eject any paper in the
paper path. Load the correct size paper or stop the data from the
computer and reset the printer to the correct SelecType paper size
setting. You can also press ON LINE to resume printing on the
currently loaded paper. If you do this, however, some data may be
lost. See Chapter 2 to change the paper size setting.
Note: If the SelecType auto continue menu is set to on, the PS
error may be cleared automatically even though the problem
remains. In most instances, leave the auto continue menu set to
on.
r E Reset
This status message appears briefly when you press RESET. The
printer erases any settings you made with software commands and
reverts to the most recent SelecType settings.
r F Factory reset
This status message appears briefly when you hold down the RESET
button for five seconds or longer. The printer resets all SelecType
settings to their factory defaults. See Chapter 2 for a list of SelecType
menus and their default settings.
S P Self print
When you print the status sheet or the self test, this status message
appears.
Troubleshooting 6-7