Filter
Top Products
The Control Panel
Buttons
Most of the buttons have more than one name and. function,
depending on whether the printer cover is open or closed and what
mode the printer is in. The following section describes the functions
of the buttons when the cover is closed.
ON LINE
Controls the printer’s on line/off line
status. When the printer is on line, the
ON LINE light is on and the printer can
receive and print data from the computer.
Press this button to switch between on line
and off line status.
FORM FEED
When the printer is off line, press FORM
FEED to print any data stored in the printer
memory and eject a single sheet of paper.
DRAFT
Controls whether printing is in draft or
letter quality mode. Because letter quality is
the default mode, the printer is
turned on the DRAFT light is off. Press this
button to switch between draft and letter
quality printing. If you press DRAFT during
printing, the draft mode begins with the
next page printed.
Use this button to choose unidirectional
printing for higher print quality. With the
printer off line, press DRAFT for more than 3
seconds to enter unidirectional mode. The
printer is factory-set for bidirectional
printing so you must set the printer each
time you turn it on to enable this mode.
2-4
Using the Printer