Filter
Top Products
SelecType Overview
Using SelecType
Follow these steps to use SelecType:
1.
Press ON LINE to set the printer off line and lift the printer cover.
2.
Press SelecType to enter SelecType mode.
3.
Press MENU to choose the menu digit.
4.
Press or to select the option digit.
Note: If you move past the number or digit you want while
pressing MENU, or keep pressing the button until the digit
you want reappears.
5.
Verify your choice on the display.
6.
Press SET to save the new setting.
CAUTION: A new setting does not take effect until you
save it by pressing SET. Be sure to always press SET after
you change a setting.
SelecType Menus and Options
This section lists all menus and options available when you use
SelecType. Most menus and options are the same whether you’re
working in HP, LQ, or FX emulation mode. Four of the menus,
however, have a different function when your printer is set for LQ
or FX emulation mode. These four LQ/FX menus are listed later in
this chapter. See the Quick Reference card for tables of HP, LQ and
FX emulation mode menus and options.
2-8
Using the Printer